(727) 726-5336 • sales@mastercuttool.com

Fractional Axmills - Necked Square End

Unique flute and relief angles for aluminum. Achieve faster speeds and feeds with PowerZ (ZrN) coated axmills. Available in 2 and 3 flute.

37° Flute – Increased tool strength and higher feed rate capacity, decreased axial load demands. This decreases vertical pull on workpieces.
Cylindrical Margins – Reduces chatter and improves surface finishes. Both cutting diameter and shank diameter to maintain h6 tolerances.
Double Gullet Flute Design to aid in efficient chip evacuation.

Click here to download the Axmill Full Product Line Catalog

OD	LOC	SHK	OAL	Neck OD	NeckL	Uncoated 3Flute	PowerZ 3 Flute
1/8	1/4	1/8	1-1/2	.115	1/4	426-002	426-002-4
1/8	1/4	1/8	3	.115	1-1/8	427-002	427-002-4
3/16	5/16	3/16	2	.175	3/16	426-004	426-004-4
3/16	5/16	3/16	3	.175	1-1/16	427-004	427-004-4
1/4	3/8	1/4	2-1/2	.235	3/4	426-006	426-006-4
1/4	3/8	1/4	4	.235	1-3/4	427-006	427-006-4
1/4	3/4	1/4	4	.235	1-3/8	427-008	427-008-4
5/16	7/16	5/16	2-1/2	.291	11/16	426-008	426-008-4
5/16	7/16	5/16	4	.291	1-11/16	427-010	427-010-4
5/16	13/16	5/16	4	.291	1-5/16	427-012	427-012-4
3/8	1/2	3/8	2-1/2	.355	5/8	426-010	426-010-4
3/8	1/2	3/8	4	.355	1-5/8	427-014	427-014-4
3/8	1	3/8	4	.355	1-1/8	427-016	427-016-4
1/2	5/8	1/2	3	.475	3/4	426-012	426-012-4
1/2	5/8	1/2	4	.475	1-3/4	427-018	427-018-4
1/2	5/8	1/2	6	.475	2-3/4	427-020	427-020-4
1/2	1-1/4	1/2	6	.475	2-1/8	427-022	427-022-4
5/8	3/4	5/8	3-1/2	.519	7/8	426-014	426-014-4
5/8	3/4	5/8	5	.519	1-5/8	427-024	427-024-4
5/8	3/4	5/8	6	.519	2-5/8	427-026	427-026-4
5/8	1-5/8	5/8	6	.519	1-3/4	427-028	427-028-4
3/4	1	3/4	4	.715	5/8	426-016	426-016-4
3/4	1	3/4	5	.715	1-1/2	427-030	427-030-4
3/4	1-5/8	3/4	6	.715	1-3/4	427-034	427-034-4
3/4	1	3/4	6	.715	2-3/8	427-032	427-032-4
1	1-1/4	1	5	.960	7/8	426-018	426-018-4
1	2	1	5	.960	1/8	427-040	427-040-4
1	1-1/4	1	6	.960	2-1/8	427-036	427-036-4
1	1-1/4	1	7	.960	3-1/8	427-038	427-038-4